Aim Mxl Dash Digital Display Setup and Configuration

To set up and configure your Aim Mxl Dash digital display, start by downloading and installing the Aim Dash software on your computer.

The Aim Dash software is available for both Windows and macOS, and can be downloaded from the Aim website.

Before proceeding with the setup, make sure your Aim Mxl Dash device is properly connected to your computer via USB.

Ensure the device is recognized by your computer by checking the device manager or the Aim Dash software interface.

Intriguing read: Aim Dash

The AiM MXL dash has a wide range of components and accessories available to enhance its functionality and compatibility with various vehicles.

AiM offers a variety of sensors, including the Boost / Vacuum (Absolute Pressure) Sensor 50 psi 1/8 NPT, which is ideal for measuring intake boost or crankcase pressure, and the Brake Pressure Sensor, 0-2000 psi, 1/8 NPT, which is designed for measuring brake pressure.

Some accessories, such as the Basic Wire Harness for MXL Strada Dash, are specifically designed for the MXL dash, while others, like the 16-Pin AMP Connector and Pin Kit for MXL Strada/Pista Dash, can be used with multiple AiM products.

Here's a list of some of the available sensors and accessories:

These are just a few examples of the many components and accessories available for the AiM MXL dash.

Digital dash accessories are a crucial part of keeping your AiM MXL digital dash running strong for many years to come. The good news is that AiM will continue to stock a full line of sensors and accessory parts, even though the dashes themselves are no longer in production.

If you're looking to upgrade your dash's functionality, consider adding a boost or vacuum sensor. The AiM Boost / Vacuum (Absolute Pressure) Sensor 50 psi 1/8 NPT is a top seller and ideal for measuring intake boost or crankcase pressure.

AiM also offers a range of download cables for your MXL dash, including the AiM MXL (3.5mm) Download Cable and the AiM MXL 2.5mm (2004 Only) Download Cable. These cables are essential for transferring data from your dash to your computer.

On a similar theme: Digital Racing Dash

You'll also need a basic wire harness to connect your MXL Strada dash. AiM offers a Basic Wire Harness for MXL Strada Dash that makes it easy to get started.

Here are some of the top digital dash accessories from AiM:

These are just a few examples of the many digital dash accessories available from AiM. By investing in these accessories, you can ensure that your dash continues to run smoothly and accurately for years to come.

Recommended read: Dash Accessories Robot

The GPS Module for Mxl Series is a fantastic addition to your MXL, MXL2, MXG, MXS, or MyChron4 dash.

This module, developed by AiM, allows for track mapping, which is a game-changer for any serious racing enthusiast.

The GPS08 module from AiM further expands the track mapping abilities of the EVO3 data logger and MXL series dashes.

With this module, you can also enjoy lap timing and even split times, giving you a more detailed understanding of your performance.

The GPS08 module is a great way to take your racing experience to the next level, especially if you're serious about improving your skills.

Related reading: Track Dash

The Sport Shift Light Module is a compact unit that can be installed to give you another set of shift lights right in your line of sight.

This module is designed for AiM dash users who want to improve their visibility of shift lights.

It's compatible with various AiM models, including MXL2, MXG/MXP/MXS/EVO4S/EVO5.

Installation of the AiM MXL dash is relatively straightforward, taking about 2 hours to mount the dash, although this time may vary depending on the individual's experience.

The open-air design of the Exocet makes installation easier, but you may need to get creative with custom brackets like we did. We cut and welded scrap aluminum stock to make a sturdy bracket to bolt the dash to the steering column support.

Wiring is a simple process, requiring just four wires: a 12-volt source, a ground, and two CAN bus connections.

The installation process for our Exocet system was surprisingly straightforward. It only took about 2 hours to mount the dash, which is a testament to its open-air design and lack of bodywork.

We chose to install the dash on the steering column, allowing the driver to view it through the steering wheel. This placement required some creative problem-solving, as the Exomotive-supplied dash shroud wasn't the right shape or location for our MXP.

A custom bracket made from scrap aluminum stock was the solution to this issue. We cut and welded the bracket to fit perfectly, then powder-coated it to match the chassis.

Wiring was the final step, and fortunately, it was a simple process. With only four wires needed - a 12-volt source, a ground, and two CAN bus connections - the installation was almost effortless.

The configuration process is just as important as the installation itself. Configuration is where you get to decide what information is most important to you and how you want it to be displayed.

A traditional dash can be overwhelming with too much information at once, but a digital dash allows you to filter and prioritize changing information.

You don't need to display every single gauge or metric, only the ones that are critical to your driving experience. For example, you can set the dash to only show engine temperature when the car is overheating.

This teaches the dash to watch itself, essentially making it a friendly copilot that can keep an eye on things for you while you focus on driving.